Installing Our Invisable Tape Weft

Start with clean, dry, and product-free hair. Wash and dry your hair before installing the extensions.

Section your hair horizontally, starting from the nape of your neck and working your way up. Use sectioning clips to keep the rest of your hair out of the way.

Take a tape-in hair weft extension and measure it against the sectioned hair. Trim the extension if needed to match the width of the section.

Peel off the backing from one side of the tape weft to expose the adhesive.

Hold the section of your natural hair slightly away from your scalp.

Place the adhesive side of the tape weft against the section, about 1 cm (0.4 inches) away from the scalp. Press down firmly to secure the extension.

Repeat the process, sandwiching the natural hair between two tape wefts. Ensure that there's a small gap about 2 cm between the wefts to allow for natural movement.

Press the extension firmly to ensure a strong bond. Use a tail comb or your fingers to smooth out any air bubbles and ensure proper adhesion Use a hair dryer on a low heat setting to gently warm the adhesive and help it bond better.

Continue working in horizontal sections, moving up your head. Be mindful of the placement, ensuring that the extensions are evenly distributed and positioned securely.

Once all the extensions are applied, style your hair as desired. Use a hairbrush or wide-tooth comb to blend your natural hair with the extensions for a seamless look.

Trim and layer the extensions if necessary to create a natural, blended appearance.

If you're reapplying the extensions, gently remove the tape wefts from your hair using our all natural citrus oil based extension remover. Slowly peel the extensions apart, starting from the bottom.

Clean the adhesive residue from the wefts using an adhesive remover, if needed.

Apply new tape to the extensions

Repeat the installation steps above using the clean and re-taped extensions.